Eutectic plates

Melting point
Casing color
Cap color
Dimensions (LxBxH)
Article number
-3° C
RAL 3020
red
390 x 295 x 34 mm
6029524
-3° C
RAL 3020
red
480 x 280 x 34 mm
1006919
-3° C
natural
red
480 x 280 x 34 mm
0004655
-3° C
natural
red
615 x 378 x 34 mm
0044439
-14° C
natural
yellow
480 x 280 x 34 mm
0047068
-18° C
natural
green
480 x 280 x 34 mm
6081958
-21° C
natural
blue
390 x 295 x 34 mm
6029522
-21° C
natural
blue
480 x 280 x 34 mm
0074699
-21° C
RAL 5010
blue
480 x 280 x 34 mm
1006918
-21° C
natural
blue
615 x 378 x 34 mm
0004658
-21° C
natural
blue
615 x 378 x 34 mm
0074675

Components

  • Outer casing made from food-safe and durable polythene
  • A non-toxic brine is used as coolant

Preparation

  • Freezing the plates in the cold store or fast freezing cell
  • The filling must be completely frozen and solidified before use
  • The freezing temperature for this must be at least 5°C below the melting temperature of the eutectic plate
  • To obtain optimum freezing results, an air gap must always be present between the eutectic plates so that the cold air can circulate without impediment
  • It is best to use the GEBHARDT freezing rack for this!

Application

Eutectic plates can be placed in the Isotec insulated container on either support rails or special mesh floors. They release their stored energy during transport, thus enabling longer transport times – depending on the type and number of plates used. We shall be pleased to calculate your individual application!